Macros

What is a macro?

A macro is used within the definition of a request.

A macro starts with an @.

Example: @cont or @email or @ns


Every time you find a macro, please check the definition of this macro for further information.

Last update: 2007-04-02 15:20

E-mail Address

@email

This means an email address in the following format:

Valid values (.com/.net only):
foo@bar.com
foo@bar.com#1
foo@bar.com#15

 Invalid values:
Hans Nase <hans@foo.com>
hans@foo.com (Hans Nase)


Valid values (.org/.info/.biz/.de/.cn only):
foo@bar.com
foo-bar@bar.com

Invalid values:
Hans Nase <hans@foo.com>
hans@foo.com (Hans Nase)
foo@bar.com#15

Last update: 2011-08-11 15:34

.com/.net Contacts

new-handle (implicit creation of a new contact)


This means the definition of a new contact. If a contact with the provided email address exists in the JOKER-DATABASE, a new contact will be created and we will add a numerical suffix to the email address that starts with "0" and increases by "1" for every existing contact with such a emailaddress in the JOKER-DATABASE.


 ATTENTION:

The name of the request field depends on the context. if you want to create a contact for the owner-contact, you have to replace the ".." at the beginning of the fieldname with "owner-contact".

If you want to create a contact for the admin-contact, you have to replace the ".." at the beginning of the fieldname with "admin-contact".

If you want to create a contact for the tech-contact, you have to replace the ".." at the beginning of the fieldname with "tech-contact".

If you want to create a contact for the billing-contact, you have to replace the ".." at the beginning of the fieldname with "billing-contact".

request-field valid values required
".."-individual [YN] yes
".."-lname [\x20-\x7e]{0,80} yes, if individual = Y
".."-fname [\x20-\x7e]{0,80} yes, if individual = Y
".."-title [\x20-\x7e]{0,80} no
".."-organization [\x20-\x7e]{0,80} yes, if individual = N
".."-address-1 [\x20-\x7e]{1,80} yes
".."-address-2 [\x20-\x7e]{0,80} no
".."-postal-code [\x20-\x7e]{1,50} yes
".."-city [\x20-\x7e]{1,80} yes
".."-state [\x20-\x7e]{0,80} no
".."-country @country yes
".."-email @email yes
".."-phone [[\x20-\x7e]{1,50} yes
".."-fax [[\x20-\x7e]{0,50} no


An existing contact (@cont or @same-as) (.com/.net only)

This means an existing contact handle in the JOKER-DATABASE.

Examples:


owner-contact-handle:foo@bar.com#0
admin-contact-handle:foo@bar.com
tech-contact-handle:foo@bar.com#15
billing-contact-handle:foo@bar.com#15

In case you have entered a non-existing contact handle, the system will send you an errormail.

It is also possible to set a reference to a contact definition, which has been made earlier within the current request. To do so, please use the following syntax:

admin-contact-handle:same-as-owner-contact
tech-contact-handle:same-as-admin-contact
billing-contact-handle:same-as-tech-contact

The @same-as makro always replaces the value for the specified contact handle with the email address of the makrotarget. If the referenced contact has to be created with this request, it takes the result handle.

Keep in mind that for (.com/.net)-requests, contact handles for (.info)-contacts are not allowed. If you are referencing to a shortcut like C00783-LRMS, you will get an error.

Last update: 2007-04-17 22:05

.com Contacts

new-handle (implicit creation of a new contact)

 

This means the definition of a new contact. if a contact with the provided email address exists in the JOKER-DATABASE, a new contact will be created. The reference for the created handle is following the format CCOM-<number>,

 

e.g. CCOM-176269.

 

ATTENTION:

The name of the request field depends on the context. If you want to create a contact for the owner-contact, you have to replace the ".." at the beginning of the fieldname with "owner-contact".

If you want to create a contact for the admin-contact, you have to replace the ".." at the beginning of the fieldname with "admin-contact".

If you want to create a contact for the tech-contact, you have to replace the ".." at the beginning of the fieldname with "tech-contact".

If you want to create a contact for the billing-contact, you have to replace the ".." at the beginning of the fieldname with "billing-contact".

There is a new request field called name within the contact definition. This field is mandatory, if you do not provide the fnamelname. You have to provide the request field name, if fname and lname are not found. This is very important for the whois output. Everytime a field person is shown. If you are using the request field name, the whois is showing the value for name, regardless the content of the request fields fname and lname. If you do not provide the request field name but your are providing the request fields fname and lname, the whois is showing the concatenation of these fields.

There is also a new request field called address-3 within the contact definition. This field is not mandatory, it is simply the 3rd line of the address.

request-field valid values required
".."-individual [YN] yes
".."-lname [\x20-\x7e]{0,80} no, if name is given
".."-fname [\x20-\x7e]{0,80} no, if name is given
".."-name [\x20-\x7e]{0,80} yes, if fname and/or lname are not given
".."-title [\x20-\x7e]{0,80} no
".."-organization [\x20-\x7e]{0,80} yes, if individual = N
".."-address-1 [\x20-\x7e]{1,80} yes
".."-address-2 [\x20-\x7e]{0,80} no
".."-address-3 [\x20-\x7e]{0,80} no
".."-postal-code [\x20-\x7e]{1,50} yes
".."-city [\x20-\x7e]{1,80} yes
".."-state [\x20-\x7e]{0,80} no
".."-country @country yes
".."-email @email yes
".."-phone [[\x20-\x7e]{1,50} yes
".."-fax [[\x20-\x7e]{0,50} no


An existing contact (@comcont or @same-as) (.com only)

This means an existing contact handle in the JOKER-DATABASE.

Examples:

owner-contact-handle:CCOM-176269
admin-contact-handle:CCOM-176229
tech-contact-handle:CCOM-176269
billing-contact-handle:CCOM-176269

In case you have entered a non-existing contact handle, the system will send you an errormail.

It is also possible to set a reference to a contact definition, which has been made earlier within the current request. To do so, please use the following syntax:

admin-contact-handle:same-as-owner-contact
tech-contact-handle:same-as-admin-contact
billing-contact-handle:same-as-tech-contact

The @same-as makro always replaces the value for the specified contact handle with the email address of the makrotarget. If the referenced contact has to be created with this request, it takes the result handle.

Keep in mind that for .com-requests the contact handles for (.com/.net)-contacts are not allowed. If you are referencing to a shortcut like hans@nose.net#1, you will get an error.

Last update: 2015-11-09 17:47

.net Contacts

new-handle (implicit creation of a new contact)

 

This means the definition of a new contact. if a contact with the provided email address exists in the JOKER-DATABASE, a new contact will be created. The reference for the created handle is following the format CNET-<number>, e.g. CNET-176269.

 

ATTENTION:

The name of the request field depends on the context. If you want to create a contact for the owner-contact, you have to replace the ".." at the beginning of the fieldname with "owner-contact".

If you want to create a contact for the admin-contact, you have to replace the ".." at the beginning of the fieldname with "admin-contact".

If you want to create a contact for the tech-contact, you have to replace the ".." at the beginning of the fieldname with "tech-contact".

If you want to create a contact for the billing-contact, you have to replace the ".." at the beginning of the fieldname with "billing-contact".

There is a new request field called name within the contact definition. This field is mandatory, if you do not provide the fnamelname. You have to provide the request field name, if fname and lname are not found. This is very important for the whois output. Everytime a field person is shown. If you are using the request field name, the whois is showing the value for name, regardless the content of the request fields fname and lname. If you do not provide the request field name but your are providing the request fields fname and lname, the whois is showing the concatenation of these fields.

There is also a new request field called address-3 within the contact definition. This field is not mandatory, it is simply the 3rd line of the address.


request-field valid values required
".."-individual [YN] yes
".."-lname [\x20-\x7e]{0,80} no, if name is given
".."-fname [\x20-\x7e]{0,80} no, if name is given
".."-name [\x20-\x7e]{0,80} yes, if fname and/or lname are not given
".."-title [\x20-\x7e]{0,80} no
".."-organization [\x20-\x7e]{0,80} yes, if individual = N
".."-address-1 [\x20-\x7e]{1,80} yes
".."-address-2 [\x20-\x7e]{0,80} no
".."-address-3 [\x20-\x7e]{0,80} no
".."-postal-code [\x20-\x7e]{1,50} yes
".."-city [\x20-\x7e]{1,80} yes
".."-state [\x20-\x7e]{0,80} no
".."-country @country yes
".."-email @email yes
".."-phone [[\x20-\x7e]{1,50} yes
".."-fax [[\x20-\x7e]{0,50} no


An existing contact (@netcont or @same-as) (.net only)

This means an existing contact handle in the JOKER-DATABASE.

Examples:

owner-contact-handle:CNET-176269
admin-contact-handle:CNET-176229
tech-contact-handle:CNET-176269
billing-contact-handle:CNET-176269

In case you have entered a non-existing contact handle, the system will send you an errormail.

 
It is also possible to set a reference to a contact definition, which has been made earlier within the current request. To do so, please use the following syntax:
 

admin-contact-handle:same-as-owner-contact
 tech-contact-handle:same-as-admin-contact
 billing-contact-handle:same-as-tech-contact
The @same-as makro always replaces the value for the specified contact handle with the email address of the makrotarget. If the referenced contact has to be created with this request, it takes the result handle.
Keep in mind that for .net-requests the contact handles for (.com/.net)-contacts are not allowed. If you are referencing to a shortcut like hans@nose.net#1, you will get an error.

 

Last update: 2015-11-09 17:48

.org Contacts

new-handle (implicit creation of a new contact)

 

This means the definition of a new contact. if a contact with the provided email address exists in the JOKER-DATABASE, a new contact will be created. The reference for the created handle is following the format CORG-<number>, e.g. CORG-176269.

 

ATTENTION:

The name of the request field depends on the context. If you want to create a contact for the owner-contact, you have to replace the ".." at the beginning of the fieldname with "owner-contact".

If you want to create a contact for the admin-contact, you have to replace the ".." at the beginning of the fieldname with "admin-contact".

If you want to create a contact for the tech-contact, you have to replace the ".." at the beginning of the fieldname with "tech-contact".

If you want to create a contact for the billing-contact, you have to replace the ".." at the beginning of the fieldname with "billing-contact".

There is a new request field called name within the contact definition. This field is mandatory, if you do not provide the fnamelname. You have to provide the request field name, if fname and lname are not found. This is very important for the whois output. Everytime a field person is shown. If you are using the request field name, the whois is showing the value for name, regardless the content of the request fields fname and lname. If you do not provide the request field name but your are providing the request fields fname and lname, the whois is showing the concatenation of these fields.

There is also a new request field called address-3 within the contact definition. This field is not mandatory, it is simply the 3rd line of the address.

 

request-field valid values required
".."-individual [YN] yes
".."-lname [\x20-\x7e]{0,80} no, if name is given
".."-fname [\x20-\x7e]{0,80} no, if name is given
".."-name [\x20-\x7e]{0,80} yes, if fname and/or lname are not given
".."-title [\x20-\x7e]{0,80} no
".."-organization [\x20-\x7e]{0,80} yes, if individual = N
".."-address-1 [\x20-\x7e]{1,80} yes
".."-address-2 [\x20-\x7e]{0,80} no
".."-address-3 [\x20-\x7e]{0,80} no
".."-postal-code [\x20-\x7e]{1,50} yes
".."-city [\x20-\x7e]{1,80} yes
".."-state [\x20-\x7e]{0,80} no
".."-country @country yes
".."-email @email yes
".."-phone [[\x20-\x7e]{1,50} yes
".."-fax [[\x20-\x7e]{0,50} no


An existing contact (@orgcont or @same-as) (.org only)

This means an existing contact handle in the JOKER-DATABASE.

Examples:

owner-contact-handle:CORG-176269
admin-contact-handle:CORG-176229
tech-contact-handle:CORG-176269
billing-contact-handle:CORG-176269

In case you have entered a non-existing contact handle, the system will send you an errormail.

 
It is also possible to set a reference to a contact definition, which has been made earlier within the current request. To do so, please use the following syntax:
 

admin-contact-handle:same-as-owner-contact
 tech-contact-handle:same-as-admin-contact
 billing-contact-handle:same-as-tech-contact
The @same-as makro always replaces the value for the specified contact handle with the email address of the makrotarget. If the referenced contact has to be created with this request, it takes the result handle.
Keep in mind that for .org-requests the contact handles for (.com/.net)-contacts are not allowed. If you are referencing to a shortcut like hans@nose.net#1, you will get an error.

Last update: 2015-11-09 17:49

.info Contacts

new-handle (implicit creation of a new contact)

 

This means the definition of a new contact. if a contact with the provided email address exists in the JOKER-DATABASE, a new contact will be created. The reference for the created handle is following the format C<number>-LRMS, e.g. C176269-LRMS.

 

ATTENTION:

The name of the request field depends on the context. If you want to create a contact for the owner-contact, you have to replace the ".." at the beginning of the fieldname with "owner-contact".

If you want to create a contact for the admin-contact, you have to replace the ".." at the beginning of the fieldname with "admin-contact".

If you want to create a contact for the tech-contact, you have to replace the ".." at the beginning of the fieldname with "tech-contact".

If you want to create a contact for the billing-contact, you have to replace the ".." at the beginning of the fieldname with "billing-contact".

There is a new request field called name within the contact definition. This field is mandatory, if you do not provide the fnamelname. You have to provide the request field name, if fname and lname are not found. This is very important for the whois output. Everytime a field person is shown. If you are using the request field name, the whois is showing the value for name, regardless the content of the request fields fname and lname. If you do not provide the request field name but your are providing the request fields fname and lname, the whois is showing the concatenation of these fields.

There is also a new request field called address-3 within the contact definition. This field is not mandatory, it is simply the 3rd line of the address.

request-field valid values required
".."-individual [YN] yes
".."-lname [\x20-\x7e]{0,80} no, if name is given
".."-fname [\x20-\x7e]{0,80} no, if name is given
".."-name [\x20-\x7e]{0,80} yes, if fname and/or lname are not given
".."-title [\x20-\x7e]{0,80} no
".."-organization [\x20-\x7e]{0,80} yes, if individual = N
".."-address-1 [\x20-\x7e]{1,80} yes
".."-address-2 [\x20-\x7e]{0,80} no
".."-address-3 [\x20-\x7e]{0,80} no
".."-postal-code [\x20-\x7e]{1,50} yes
".."-city [\x20-\x7e]{1,80} yes
".."-state [\x20-\x7e]{0,80} no
".."-country @country yes
".."-email @email yes
".."-phone [[\x20-\x7e]{1,50} yes
".."-fax [[\x20-\x7e]{0,50} no

 

An existing contact (@infocont or @same-as) (.info only)

This means an existing contact handle in the JOKER-DATABASE.

Examples:

owner-contact-handle:C176269-LRMS
admin-contact-handle:CAFI-007
tech-contact-handle:C176269-LRMS
billing-contact-handle:CAFI-008

In case you have entered a non-existing contact handle, the system will send you an errormail.

 
It is also possible to set a reference to a contact definition, which has been made earlier within the current request. To do so, please use the following syntax:
 
admin-contact-handle:same-as-owner-contact
tech-contact-handle:same-as-admin-contact
billing-contact-handle:same-as-tech-contact
 

 

The @same-as makro always replaces the value for the specified contact handle with the email address of the makrotarget. If the referenced contact has to be created with this request, it takes the result handle.
Keep in mind that for .info-requests the contact handles for (.com/.net)-contacts are not allowed. If you are referencing to a shortcut like hans@nose.net#1, you will get an error.

Last update: 2015-11-09 17:49

.biz Contacts

new-handle (implicit creation of a new contact)

 

This means the definition of a new contact. if a contact with the provided email address exists in the JOKER-DATABASE, a new contact will be created.

 

ATTENTION

According to the rules of NEULEVEL, the fieldlength for most of the requestfields are limited to 30 characters. Please check very carefully the definitions of the request fields.

The name of the request field depends on the context. If you want to create a contact for the owner-contact, you have to replace the ".." at the beginning of the fieldname with "owner-contact".

If you want to create a contact for the admin-contact, you have to replace the ".." at the beginning of the fieldname with "admin-contact".

If you want to create a contact for the tech-contact, you have to replace the ".." at the beginning of the fieldname with "tech-contact".

If you want to create a contact for the billing-contact, you have to replace the ".." at the beginning of the fieldname with "billing-contact".

There is a new request field called name within the contact definition. This field is mandatory, if you do not provide the fnamelname. You have to provide the request field name, if fname and lname are not found. This is very important for the whois output. Everytime a field person is shown. If you are using the request field name, the whois is showing the value for name, regardless the content of the request fields fname and lname. If you do not provide the request field name but your are providing the request fields fname and lname, the whois is showing the concatenation of these fields.

Please, keep in mind, that if you are using the concatenation of fname and lname, you have to care that the sum of both fields should not be longer than 30 characters.

There is also a new request field called address-3 within the contact definition. This field is not mandatory, it is simply the 3rd line of the address.

 

 

request-field valid values required
".."-individual [YN] yes
".."-lname [\x20-\x7e]{0,30} no, if name is given
".."-fname [\x20-\x7e]{0,30} no, if name is given
".."-name [\x20-\x7e]{0,30} yes, if fname and/or lname are not given
".."-title [\x20-\x7e]{0,30} no
".."-organization [\x20-\x7e]{0,30} yes, if individual = N
".."-address-1 [\x20-\x7e]{1,30} yes
".."-address-2 [\x20-\x7e]{0,30} no
".."-address-3 [\x20-\x7e]{0,30} no
".."-postal-code [\x20-\x7e]{1,10} yes
".."-city [\x20-\x7e]{1,30} yes
".."-state [\x20-\x7e]{0,30} no
".."-country @country yes
".."-email @email yes
".."-phone [[\x20-\x7e]{1,17} yes
".."-fax [[\x20-\x7e]{0,17} no

 


An existing contact (@bizcont or @same-as) (.biz only)

This means an existing contact handle in the JOKER-DATABASE.

Examples:

owner-contact-handle: CNEU-12345
admin-contact-handle: CNEU-12345
 tech-contact-handle: CNEU-12345
 billing-contact-handle: CNEU-12345

In case you have entered a non-existing contact handle, the system will send you an errormail.

 
It is also possible to set a reference to a contact definition, which has been made earlier within the current request. To do so, please use the following syntax:
 
admin-contact-handle:same-as-owner-contact
tech-contact-handle:same-as-admin-contact
billing-contact-handle:same-as-tech-contact
 
 

The @same-as makro always replaces the value for the specified contact handle with the email address of the makrotarget. If the referenced contact has to be created with this request, it takes the result handle.
Keep in mind that for .biz-requests the contact handles for (.com/.net/.org/.info)-contacts are not allowed. If you are referencing to a shortcut like hans@nose.net#1, you will get an error.

Note that for .biz-requests the contacthandles for (.info)-contacts are not allowed. If you referencing to a shortcut like C176269-LRMS, you will get an error.

 

Last update: 2015-11-09 17:51

.mobi Contacts

new-handle (implicit creation of a new contact)

 
 

This means the definition of a new contact. if a contact with the provided email address exists in the JOKER-DATABASE, a new contact will be created. The reference for the created handle is following the format COMO-<number>, e.g. COMO-176269.

 
 

ATTENTION:

The name of the request field depends on the context. If you want to create a contact for the owner-contact, you have to replace the ".." at the beginning of the fieldname with "owner-contact".

If you want to create a contact for the admin-contact, you have to replace the ".." at the beginning of the fieldname with "admin-contact".

If you want to create a contact for the tech-contact, you have to replace the ".." at the beginning of the fieldname with "tech-contact".

If you want to create a contact for the billing-contact, you have to replace the ".." at the beginning of the fieldname with "billing-contact".

 

There is a new request field called name within the contact definition. This field is mandatory, if you do not provide the fnamelname. You have to provide the request field name, if fname and lname are not found. This is very important for the whois output. Everytime a field person is shown. If you are using the request field name, the whois is showing the value for name, regardless the content of the request fields fname and lname. If you do not provide the request field name but your are providing the request fields fname and lname, the whois is showing the concatenation of these fields.

There is also a new request field called address-3 within the contact definition. This field is not mandatory, it is simply the 3rd line of the address.
 

 

request-field valid values required
".."-individual [YN] yes
".."-lname [\x20-\x7e]{0,80} no, if name is given
".."-fname [\x20-\x7e]{0,80} no, if name is given
".."-name [\x20-\x7e]{0,80} yes, if fname and/or lname are not given
".."-title [\x20-\x7e]{0,80} no
".."-organization [\x20-\x7e]{0,80} yes, if individual = N
".."-address-1 [\x20-\x7e]{1,80} yes
".."-address-2 [\x20-\x7e]{0,80} no
".."-address-3 [\x20-\x7e]{0,80} no
".."-postal-code [\x20-\x7e]{1,50} yes
".."-city [\x20-\x7e]{1,80} yes
".."-state [\x20-\x7e]{0,80} no
".."-country @country yes
".."-email @email yes
".."-phone [[\x20-\x7e]{1,50} yes
".."-fax [[\x20-\x7e]{0,50} no

 

An existing contact (@mobicont or @same-as) (.mobi only)

This means an existing contact handle in the JOKER-DATABASE.

Examples:

owner-contact-handle:COMO-176269
admin-contact-handle:COMO-176229
tech-contact-handle:COMO-176269
billing-contact-handle:COMO-176269

In case you have entered a non-existing contact handle, the system will send you an errormail.

 
It is also possible to set a reference to a contact definition, which has been made earlier within the current request. To do so, please use the following syntax:
 
admin-contact-handle:same-as-owner-contact
tech-contact-handle:same-as-admin-contact
billing-contact-handle:same-as-tech-contact
 

 

The @same-as makro always replaces the value for the specified contact handle with the email address of the makrotarget. If the referenced contact has to be created with this request, it takes the result handle.
Keep in mind that for .mobi-requests the contact handles for (.com/.net)-contacts are not allowed. If you are referencing to a shortcut like hans@nose.net#1, you will get an error.

 

Last update: 2015-11-09 17:50

.name Contacts

new-handle (implicit creation of a new contact)

This means the definition of a new contact. if a contact with the provided email address exists in the JOKER-DATABASE, a new contact will be created. The reference for the created handle is following the format CNAM-<number>, e.g. CNAM-176269.

ATTENTION:

The name of the request field depends on the context. If you want to create a contact for the owner-contact, you have to replace the ".." at the beginning of the fieldname with "owner-contact".
If you want to create a contact for the admin-contact, you have to replace the ".." at the beginning of the fieldname with "admin-contact".
If you want to create a contact for the tech-contact, you have to replace the ".." at the beginning of the fieldname with "tech-contact".
If you want to create a contact for the billing-contact, you have to replace the ".." at the beginning of the fieldname with "billing-contact".

 

There is a new request field called name within the contact definition. This field is mandatory, if you do not provide the fname and lname. You have to provide the request field name, if fname and lname are not found. This is very important for the whois output. Everytime a field person is shown. If you are using the request field name, the whois is showing the value for name, regardless the content of the request fields fname and lname. If you do not provide the request field name but your are providing the request fields fname and lname, the whois is showing the concatenation of these fields.

There is also a new request field called address-3 within the contact definition. This field is not mandatory, it is simply the 3rd line of the address.

request-field valid values required
".."-individual [YN] yes
".."-lname [\x20-\x7e]{0,80} no, if name is given
".."-fname [\x20-\x7e]{0,80} no, if name is given
".."-name [\x20-\x7e]{0,80} yes, if fname and/or lname are not given
".."-title [\x20-\x7e]{0,80} no
".."-organization [\x20-\x7e]{0,80} yes, if individual = N
".."-address-1 [\x20-\x7e]{1,80} yes
".."-address-2 [\x20-\x7e]{0,80} no
".."-address-3 [\x20-\x7e]{0,80} no
".."-postal-code [\x20-\x7e]{1,50} yes
".."-city [\x20-\x7e]{1,80} yes
".."-state [\x20-\x7e]{0,80} no
".."-country @country yes
".."-email @email yes
".."-phone [[\x20-\x7e]{1,50} yes
".."-fax [[\x20-\x7e]{0,50} no


An existing contact (@namecont or @same-as) (.name only)

This means an existing contact handle in the JOKER-DATABASE.

Examples:

owner-contact-handle:CNAM-176269
admin-contact-handle:CNAM-176229
tech-contact-handle:CNAM-176269
billing-contact-handle:CNAM-176269

In case you have entered a non-existing contact handle, the system will send you an errormail.

It is also possible to set a reference to a contact definition, which has been made earlier within the current request. To do so, please use the following syntax:
admin-contact-handle:same-as-owner-contact
tech-contact-handle:same-as-admin-contact
billing-contact-handle:same-as-tech-contact

The @same-as makro always replaces the value for the specified contact handle with the email address of the makrotarget. If the referenced contact has to be created with this request, it takes the result handle.
Keep in mind that for .name-requests the contact handles for (.com/.net)-contacts are not allowed. If you are referencing to a shortcut like hans@nose.net#1, you will get an error.

Last update: 2007-06-21 11:11

.us Contacts

new-handle (implicit creation of a new contact)

 
 

This means the definition of a new contact. if a contact with the provided email address exists in the JOKER-DATABASE, a new contact will be created. The reference for the created handle is following the format COUS-<number>, e.g. COUS-176269.

 

ATTENTION:

The name of the request field depends on the context. If you want to create a contact for the owner-contact, you have to replace the ".." at the beginning of the fieldname with "owner-contact".
If you want to create a contact for the admin-contact, you have to replace the ".." at the beginning of the fieldname with "admin-contact".
If you want to create a contact for the tech-contact, you have to replace the ".." at the beginning of the fieldname with "tech-contact".
If you want to create a contact for the billing-contact, you have to replace the ".." at the beginning of the fieldname with "billing-contact".
There is a new request field called name within the contact definition. This field is mandatory, if you do not provide the fnamelname. You have to provide the request field name, if fname and lname are not found. This is very important for the whois output. Everytime a field person is shown. If you are using the request field name, the whois is showing the value for name, regardless the content of the request fields fname and lname. If you do not provide the request field name but your are providing the request fields fname and lname, the whois is showing the concatenation of these fields.
There is also a new request field called address-3 within the contact definition. This field is not mandatory, it is simply the 3rd line of the address.
 
 
 
 
request-field valid values required
".."-individual [YN] yes
".."-lname [\x20-\x7e]{0,80} no, if name is given
".."-fname [\x20-\x7e]{0,80} no, if name is given
".."-name [\x20-\x7e]{0,80} yes, if fname and/or lname are not given
".."-title [\x20-\x7e]{0,80} no
".."-organization [\x20-\x7e]{0,80} yes, if individual = N
".."-address-1 [\x20-\x7e]{1,80} yes
".."-address-2 [\x20-\x7e]{0,80} no
".."-address-3 [\x20-\x7e]{0,80} no
".."-postal-code [\x20-\x7e]{1,50} yes
".."-city [\x20-\x7e]{1,80} yes
".."-state [\x20-\x7e]{0,80} no
".."-country @country yes
".."-email @email yes
".."-phone [[\x20-\x7e]{1,50} yes
".."-fax [[\x20-\x7e]{0,50} no
 

 

An existing contact (@uscont or @same-as) (.us only)

This means an existing contact handle in the JOKER-DATABASE.

Examples:

owner-contact-handle:COUS-176269
admin-contact-handle:COUS-176229
tech-contact-handle:COUS-176269
billing-contact-handle:COUS-176269

In case you have entered a non-existing contact handle, the system will send you an errormail.

 
It is also possible to set a reference to a contact definition, which has been made earlier within the current request. To do so, please use the following syntax:
 
admin-contact-handle:same-as-owner-contact
tech-contact-handle:same-as-admin-contact
billing-contact-handle:same-as-tech-contact
 

 

The @same-as makro always replaces the value for the specified contact handle with the email address of the makrotarget. If the referenced contact has to be created with this request, it takes the result handle.
Keep in mind that for .us-requests the contact handles for (.com/.net)-contacts are not allowed. If you are referencing to a shortcut like hans@nose.net#1, you will get an error.

 

 

Last update: 2015-11-09 17:51

.de Contacts

new-handle (implicit creation of a new contact)

 
 

This means the definition of a new contact. if a contact with the provided email address exists in the JOKER-DATABASE, a new contact will be created. The reference for the created handle is following the format CODE-<number>, e.g. CODE-176269.

 

ATTENTION:

The name of the request field depends on the context. If you want to create a contact for the owner-contact, you have to replace the ".." at the beginning of the fieldname with "owner-contact".
If you want to create a contact for the admin-contact, you have to replace the ".." at the beginning of the fieldname with "admin-contact".
If you want to create a contact for the tech-contact, you have to replace the ".." at the beginning of the fieldname with "tech-contact".
If you want to create a contact for the billing-contact, you have to replace the ".." at the beginning of the fieldname with "billing-contact".
There is a new request field called name within the contact definition. This field is mandatory, if you do not provide the fnamelname. You have to provide the request field name, if fname and lname are not found. This is very important for the whois output. Everytime a field person is shown. If you are using the request field name, the whois is showing the value for name, regardless the content of the request fields fname and lname. If you do not provide the request field name but your are providing the request fields fname and lname, the whois is showing the concatenation of these fields.
There is also a new request field called address-3 within the contact definition. This field is not mandatory, it is simply the 3rd line of the address.
 
 
 
request-field valid values required
".."-individual [YN] yes
".."-lname [\x20-\x7e]{0,80} no, if name is given
".."-fname [\x20-\x7e]{0,80} no, if name is given
".."-name [\x20-\x7e]{0,80} yes, if fname and/or lname are not given
".."-title [\x20-\x7e]{0,80} no
".."-organization [\x20-\x7e]{0,80} yes, if individual = N
".."-address-1 [\x20-\x7e]{1,80} yes
".."-address-2 [\x20-\x7e]{0,80} no
".."-address-3 [\x20-\x7e]{0,80} no
".."-postal-code [\x20-\x7e]{1,50} yes
".."-city [\x20-\x7e]{1,80} yes
".."-state [\x20-\x7e]{0,80} no
".."-country @country yes
".."-email @email yes
".."-phone [[\x20-\x7e]{1,50} yes
".."-fax [[\x20-\x7e]{0,50} yes, but for admin-c and tech-c only
 


An existing contact (@decont or @same-as) (.de only)

This means an existing contact handle in the JOKER-DATABASE.

Examples:

owner-contact-handle:CODE-176269
admin-contact-handle:CODE-176229
tech-contact-handle:CODE-176269
billing-contact-handle:CODE-176269

In case you have entered a non-existing contact handle, the system will send you an errormail.

 
It is also possible to set a reference to a contact definition, which has been made earlier within the current request. To do so, please use the following syntax:
 
admin-contact-handle:same-as-owner-contact
tech-contact-handle:same-as-admin-contact
billing-contact-handle:same-as-tech-contact
 

 

The @same-as makro always replaces the value for the specified contact handle with the email address of the makrotarget. If the referenced contact has to be created with this request, it takes the result handle.
Keep in mind that for .de-requests the contact handles for (.com/.net/.org/.info/.biz/.cn)-contacts are not allowed. If you are referencing to a shortcut like hans@nose.net#1, you will get an error.

Last update: 2015-11-09 17:50

.cn Contacts

new-handle (implicit creation of a new contact)

 
 

This means the definition of a new contact. if a contact with the provided email address exists in the JOKER-DATABASE, a new contact will be created. The reference for the created handle is following the format COCN-<number>, e.g. COCN-176269.

 

ATTENTION:

The name of the request field depends on the context. If you want to create a contact for the owner-contact, you have to replace the ".." at the beginning of the fieldname with "owner-contact".
If you want to create a contact for the admin-contact, you have to replace the ".." at the beginning of the fieldname with "admin-contact".
If you want to create a contact for the tech-contact, you have to replace the ".." at the beginning of the fieldname with "tech-contact".
If you want to create a contact for the billing-contact, you have to replace the ".." at the beginning of the fieldname with "billing-contact".
There is a new request field called name within the contact definition. This field is mandatory, if you do not provide the fnamelname. You have to provide the request field name, if fname and lname are not found. This is very important for the whois output. Everytime a field person is shown. If you are using the request field name, the whois is showing the value for name, regardless the content of the request fields fname and lname. If you do not provide the request field name but your are providing the request fields fname and lname, the whois is showing the concatenation of these fields.
There is also a new request field called address-3 within the contact definition. This field is not mandatory, it is simply the 3rd line of the address.
 
 
 
request-field valid values required
".."-individual [YN] yes
".."-lname [\x20-\x7e]{0,80} no, if name is given
".."-fname [\x20-\x7e]{0,80} no, if name is given
".."-name [\x20-\x7e]{0,80} yes, if fname and/or lname are not given
".."-title [\x20-\x7e]{0,80} no
".."-organization [\x20-\x7e]{0,80} yes, if individual = N
".."-address-1 [\x20-\x7e]{1,80} yes
".."-address-2 [\x20-\x7e]{0,80} no
".."-address-3 [\x20-\x7e]{0,80} no
".."-postal-code [\x20-\x7e]{1,50} yes
".."-city [\x20-\x7e]{1,80} yes
".."-state [\x20-\x7e]{0,80} no
".."-country @country yes
".."-email @email yes
".."-phone [[\x20-\x7e]{1,50} yes
".."-fax [[\x20-\x7e]{0,50} no
 

 

An existing contact (@cncont or @same-as) (.cn only)

This means an existing contact handle in the JOKER-DATABASE.

Examples:

owner-contact-handle:COCN-176269
admin-contact-handle:COCN-176229
tech-contact-handle:COCN-176269
billing-contact-handle:COCN-176269

In case you have entered a non-existing contact handle, the system will send you an errormail.

 
It is also possible to set a reference to a contact definition, which has been made earlier within the current request. To do so, please use the following syntax:
 
admin-contact-handle:same-as-owner-contact
tech-contact-handle:same-as-admin-contact
billing-contact-handle:same-as-tech-contact
 

 

The @same-as makro always replaces the value for the specified contact handle with the email address of the makrotarget. If the referenced contact has to be created with this request, it takes the result handle.
Keep in mind that for .cn-requests the contact handles for (.com/.net/.org/.info/.biz/.de)-contacts are not allowed. If you are referencing to a shortcut like hans@nose.net#1, you will get an error.

Last update: 2015-11-09 17:51

.eu Contacts

new-handle (implicit creation of a new contact)

 
 

This means the definition of a new contact. if a contact with the provided email address exists in the JOKER-DATABASE, a new contact will be created. The reference for the created handle is following the format C<number>, e.g. C176269.

 

ATTENTION:

The name of the request field depends on the context. If you want to create a contact for the owner-contact, you have to replace the ".." at the beginning of the fieldname with "owner-contact".
If you want to create a contact for the admin-contact, you have to replace the ".." at the beginning of the fieldname with "admin-contact".
If you want to create a contact for the tech-contact, you have to replace the ".." at the beginning of the fieldname with "tech-contact".
If you want to create a contact for the billing-contact, you have to replace the ".." at the beginning of the fieldname with "billing-contact".
There is a new request field called name within the contact definition. This field is mandatory, if you do not provide the fnamelname. You have to provide the request field name, if fname and lname are not found. This is very important for the whois output. Everytime a field person is shown. If you are using the request field name, the whois is showing the value for name, regardless the content of the request fields fname and lname. If you do not provide the request field name but your are providing the request fields fname and lname, the whois is showing the concatenation of these fields.
There is also a new request field called address-3 within the contact definition. This field is not mandatory, it is simply the 3rd line of the address.
 
 
 
request-field valid values required
".."-individual [YN] yes
".."-lname [\x20-\x7e]{0,80} no, if name is given
".."-fname [\x20-\x7e]{0,80} no, if name is given
".."-name [\x20-\x7e]{0,80} yes, if fname and/or lname are not given
".."-title [\x20-\x7e]{0,80} no
".."-organization [\x20-\x7e]{0,80} yes, if individual = N
".."-address-1 [\x20-\x7e]{1,80} yes
".."-address-2 [\x20-\x7e]{0,80} no
".."-address-3 [\x20-\x7e]{0,80} no
".."-postal-code [\x20-\x7e]{1,50} yes
".."-city [\x20-\x7e]{1,80} yes
".."-state [\x20-\x7e]{0,80} no
".."-country @country yes
".."-email @email yes
".."-phone [[\x20-\x7e]{1,50} yes
".."-fax [[\x20-\x7e]{0,50} no
 


An existing contact (@uscont or @same-as) (.us only)

This means an existing contact handle in the JOKER-DATABASE.

Examples:

owner-contact-handle:C176269
admin-contact-handle:C176229
tech-contact-handle:C176269
billing-contact-handle:C176269

In case you have entered a non-existing contact handle, the system will send you an errormail.

 
It is also possible to set a reference to a contact definition, which has been made earlier within the current request. To do so, please use the following syntax:
 
admin-contact-handle:same-as-owner-contact
tech-contact-handle:same-as-admin-contact
billing-contact-handle:same-as-tech-contact
 

 

The @same-as makro always replaces the value for the specified contact handle with the email address of the makrotarget. If the referenced contact has to be created with this request, it takes the result handle.
Keep in mind that for .eu-requests the contact handles for (.com/.net/.org/.info/.biz/.de/.us)-contacts are not allowed. If you are referencing to a shortcut like hans@nose.net#1, you will get an error.

Last update: 2015-11-09 17:52

Valid domain names

@dom - a valid domain name under .com/.net

@orgdom - a valid domain name under .org

@infodom - a valid domain name under .info

@dedom - a valid domain name under .de

@cndom - a valid domain name under .cn

@eudom - a valid domain name under .eu

@usdom - a valid domain name under .us

@fqdn - a valid domain name under .com/.net/.org/.info/.mobi/.name/.biz/.de/.cn/.eu/.us

Last update: 2007-03-28 15:45

Nameserver

@ns - the definition of an existing nameserver

You have to provide a valid nameserver handle. Implicit nameserver creation is not allowed.

Examples:

ns1.foo.bar.net
ns2.foo.bar.net

ns3.foo.bar.net

Last update: 2015-11-09 17:53

Zonefile entries

@a_record

[a hostprefix without the domainname]:[IP-Address]

Example1:

a:www:194.233.101.99

Example2:

a:@:194.233.101.99

@mx_record

[a hostprefix without the domainname]:[priority]:[a full qualified hostname]

Example 1:

mx:www:50:mail.hansnose.net

Example 2:

mx:www:90:mail.hansnose.net

Example 3:

mx:@:50:mail.hansnose.net

Example 4:

mx:@:90:mail.hansnose.net


@cname_record

[a hostprefix without the domainname]:[a full qualified hostname]


Example 1:

cname:www:mail.hansnose.net

Example 2:

cname:www2:mail.hansnose.net


@url_record

[a hostprefix without the domainname]::[a full qualified hostname]

Example 1:

url:www:http://some.redirector.com

Example 2:

url:www2:http://some.redirector.com:9002

Example 3:

url:www3:https://some.redirector.com

Example 4:

url:www4:https://some.redirector.com:9002

Last update: 2007-04-20 14:49

IP

@ip - a valid ip-address

IP-addresses within the following range are NOT valid:
Â

from to
10.0.0.0 10.255.255.255
127.0.0.0 127.255.255.255
192.168.0.0 192.168.255.255
172.16.0.0 172.31.255.255

Last update: 2007-04-02 16:24

Domain renewal

@renew

Here you have to provide the domain name and the renewal period or the desired expiration year on one line. You have to seperate the domain name and renewal period/expire year with an ":" (ASCII 058). The maximum for the renewal period is 9 years.

Examples:

domain1:blafasel.com:2
domain2:hansnose.net:3
domain2:hansnose.info:2005
domain2:hansnose.biz:2

Attention:

If you are using the expire year and the current expire year of the domain is equal or greater than the provided value for that field, the request will not processed.

Last update: 2007-03-28 16:12

Country code

@country - one of the following countries:

Countrycode Country
AF AFGHANISTAN
AL ALBANIA
DZ ALGERIA
AS AMERICAN SAMOA
AD ANDORRA
AO ANGOLA
AI ANGUILLA
AQ ANTARCTICA
AG ANTIGUA AND BARBUDA
AR ARGENTINA
AM ARMENIA
AW ARUBA
AU AUSTRALIA
AT AUSTRIA
AZ AZERBAIJAN
BS BAHAMAS
BH BAHRAIN
BD BANGLADESH
BB BARBADOS
BY BELARUS
BE BELGIUM
BZ BELIZE
BJ BENIN
BM BERMUDA
BT BHUTAN
BO BOLIVIA
BA BOSNIA AND HERZEGOVINA
BW BOTSWANA
BV BOUVET ISLAND
BR BRAZIL
IO BRITISH INDIAN OCEAN TERRITORY
BN BRUNEI DARUSSALAM
BG BULGARIA
BF BURKINA FASO
BI BURUNDI
KH CAMBODIA
CM CAMEROON
CA CANADA
CV CAPE VERDE
KY CAYMAN ISLANDS
CF CENTRAL AFRICAN REPUBLIC
TD CHAD
CL CHILE
CN CHINA
CX CHRISTMAS ISLAND
CC COCOS (KEELING) ISLANDS
CO COLOMBIA
KM COMOROS
CG CONGO
CD CONGO, THE DEMOCRATIC REPUBLIC OF THE
CK COOK ISLANDS
CR COSTA RICA
CI COTE D’IVOIRE
HR CROATIA
CU CUBA
CY CYPRUS
CZ CZECH REPUBLIC
DK DENMARK
DJ DJIBOUTI
DM DOMINICA
DO DOMINICAN REPUBLIC
TP TIMOR
EC ECUADOR
EG EGYPT
SV EL SALVADOR
GQ EQUATORIAL GUINEA
ER ERITREA
EE ESTONIA
ET ETHIOPIA
FK FALKLAND ISLANDS (MALVINAS)
FO FAROE ISLANDS
FJ FIJI
FI FINLAND
FR FRANCE
FX METROPOLITAN
GF FRENCH GUIANA
PF FRENCH POLYNESIA
TF FRENCH SOUTHERN TERRITORIES
GA GABON
GM GAMBIA
GE GEORGIA
DE GERMANY
GH GHANA
GI GIBRALTAR
GR GREECE
GL GREENLAND
GD GRENADA
GP GUADELOUPE
GU GUAM
GT GUATEMALA
GN GUINEA
GW BISSAU
GY GUYANA
HT HAITI
HM HEARD ISLAND AND MCDONALD ISLANDS
VA HOLY SEE (VATICAN CITY STATE)
HN HONDURAS
HK HONG KONG
HU HUNGARY
IS ICELAND
IN INDIA
ID INDONESIA
IR IRAN, ISLAMIC REPUBLIC OF
IQ IRAQ
IE IRELAND
IL ISRAEL
IT ITALY
JM JAMAICA
JP JAPAN
JO JORDAN
KZ KAZAKHSTAN
KE KENYA
KI KIRIBATI
KP KOREA, DEMOCRATIC PEOPLE’S REPUBLIC OF
KR KOREA, REPUBLIC OF
KW KUWAIT
KG KYRGYZSTAN
LA LAO PEOPLE’S DEMOCRATIC REPUBLIC
LV LATVIA
LB LEBANON
LS LESOTHO
LR LIBERIA
LY LIBYAN ARAB JAMAHIRIYA
LI LIECHTENSTEIN
LT LITHUANIA
LU LUXEMBOURG
MO MACAU
MK MACEDONIA, THE FORMER YUGOSLAV REPUBLIC OF
MG MADAGASCAR
MW MALAWI
MY MALAYSIA
MV MALDIVES
ML MALI
MT MALTA
MH MARSHALL ISLANDS
MQ MARTINIQUE
MR MAURITANIA
MU MAURITIUS
YT MAYOTTE
MX MEXICO
FM MICRONESIA, FEDERATED STATES OF
MD MOLDOVA, REPUBLIC OF
MC MONACO
MN MONGOLIA
MS MONTSERRAT
MA MOROCCO
MZ MOZAMBIQUE
MM MYANMAR
NA NAMIBIA
NR NAURU
NP NEPAL
NL NETHERLANDS
AN NETHERLANDS ANTILLES
NC NEW CALEDONIA
NZ NEW ZEALAND
NI NICARAGUA
NE NIGER
NG NIGERIA
NU NIUE
NF NORFOLK ISLAND
MP NORTHERN MARIANA ISLANDS
NO NORWAY
OM OMAN
PK PAKISTAN
PW PALAU
PA PANAMA
PG PAPUA NEW GUINEA
PY PARAGUAY
PE PERU
PH PHILIPPINES
PN PITCAIRN
PL POLAND
PT PORTUGAL
PR RICO
QA QATAR
RE REUNION
RO ROMANIA
RU RUSSIAN FEDERATION
RW RWANDA
KN SAINT KITTS AND NEVIS
LC SAINT LUCIA
VC SAINT VINCENT AND THE GRENADINES
WS SAMOA
SM SAN MARINO
ST SAO TOME AND PRINCIPE
SA SAUDI ARABIA
SN SENEGAL
SC SEYCHELLES
SL LEONE
SG SINGAPORE
SK SLOVAKIA
SI SLOVENIA
SB SOLOMON ISLANDS
SO SOMALIA
ZA AFRICA
GS SOUTH GEORGIA AND THE SOUTH SANDWICH ISLANDS
ES SPAIN
LK SRI LANKA
SH SAINT HELENA
PM SAINT PIERRE AND MIQUELON
SD SUDAN
SR SURINAME
SJ SVALBARD AND JAN MAYEN
SZ SWAZILAND
SE SWEDEN
CH SWITZERLAND
SY SYRIAN ARAB REPUBLIC
TW TAIWAN, PROVINCE OF CHINA
TJ TAJIKISTAN
TZ TANZANIA, UNITED REPUBLIC OF
TH THAILAND
TG TOGO
TK TOKELAU
TO TONGA
TT TRINIDAD AND TOBAGO
TN TUNISIA
TR TURKEY
TM TURKMENISTAN
TC TURKS AND CAICOS ISLANDS
TV TUVALU
UG UGANDA
UA UKRAINE
AE UNITED ARAB EMIRATES
GB UNITED KINGDOM
US UNITED STATES
UM UNITED STATES MINOR OUTLYING ISLANDS
UY URUGUAY
UZ UZBEKISTAN
VU VANUATU
VE VENEZUELA
VN VIETNAM
VG VIRGIN ISLANDS, BRITISH
VI VIRGIN ISLANDS, U.S.
WF WALLIS AND FUTUNA
EH SAHARA
YE YEMEN
YU YUGOSLAVIA
ZM ZAMBIA
ZW ZIMBABWE

Last update: 2007-04-17 22:12

Language code

@language - one of the following language codes

Languagecode Language
AFR Afrikaans
ALB Albanian
ARA Arabic
ARM Armenian
AZE Azerbaijani
BAQ Basque
BUL Bulgarian
BUR Burmese
CAT Catalan
CHI Chinese
CZE Czech
DAN Danish
DUT Dutch
ENG English
EST Estonian
FAO Faroese
FIN Finnish
FRE French
GEO Georgian
GER German
HEB Hebrew
HIN Hindi
HUN Hungarian
ICE Icelandic
ITA Italian
JPN Japanese
KOR Korean
KUR Kurdish
LAO Lao
LAV Latvian
LIT Lithuanian
MAC Macedonian
MAL Malayalm
NEP Nepali
NOR Norwegian
PER Persian
POL Polish
POR Portuguese
RUM Romanian
RUS Russian
SAN Sanskirt
SCC Serbian
SCR Croatian
SLO Slovak
SLV Slovenian
SPA Spanish
SWA Swahili
SWE Swedish
SYR Syriac
TAM Tamil
THA Thai
TIB Tibetan
TUR Turkish
UKR Ukrainian
URD Urdu
UZB Uzbek
VIE Vietnamese
ZHO Chinese

Last update: 2015-11-09 17:46

.me Contacts

new-handle (implicit creation of a new contact)

This means the definition of a new contact. if a contact with the provided email address exists in the JOKER-DATABASE, a new contact will be created. The reference for the created handle is following the format COME-<number>, e.g. COME-176269.

ATTENTION:

The name of the request field depends on the context. If you want to create a contact for the owner-contact, you have to replace the ".." at the beginning of the fieldname with "owner-contact".

If you want to create a contact for the admin-contact, you have to replace the ".." at the beginning of the fieldname with "admin-contact".

If you want to create a contact for the tech-contact, you have to replace the ".." at the beginning of the fieldname with "tech-contact".

If you want to create a contact for the billing-contact, you have to replace the ".." at the beginning of the fieldname with "billing-contact".

There is a new request field called name within the contact definition. This field is mandatory, if you do not provide the fnamelname. You have to provide the request field name, if fname and lname are not found. This is very important for the whois output. Everytime a field person is shown. If you are using the request field name, the whois is showing the value for name, regardless the content of the request fields fname and lname. If you do not provide the request field name but your are providing the request fields fname and lname, the whois is showing the concatenation of these fields.

There is also a new request field called address-3 within the contact definition. This field is not mandatory, it is simply the 3rd line of the address.

request-field valid values required
".."-individual [YN] yes
".."-lname [\x20-\x7e]{0,80} no, if name is given
".."-fname [\x20-\x7e]{0,80} no, if name is given
".."-name [\x20-\x7e]{0,80} yes, if fname and/or lname are not given
".."-title [\x20-\x7e]{0,80} no
".."-organization [\x20-\x7e]{0,80} yes, if individual = N
".."-address-1 [\x20-\x7e]{1,80} yes
".."-address-2 [\x20-\x7e]{0,80} no
".."-address-3 [\x20-\x7e]{0,80} no
".."-postal-code [\x20-\x7e]{1,50} yes
".."-city [\x20-\x7e]{1,80} yes
".."-state [\x20-\x7e]{0,80} no
".."-country @country yes
".."-email @email yes
".."-phone [[\x20-\x7e]{1,50} yes
".."-fax [[\x20-\x7e]{0,50} no

An existing contact (@mecont or @same-as) (.me only)

This means an existing contact handle in the JOKER-DATABASE.

Examples:

owner-contact-handle:COME-176269
admin-contact-handle:COME-176229
tech-contact-handle:COME-176269
billing-contact-handle:COME-176269

In case you have entered a non-existing contact handle, the system will send you an errormail.

It is also possible to set a reference to a contact definition, which has been made earlier within the current request. To do so, please use the following syntax:
admin-contact-handle:same-as-owner-contact
tech-contact-handle:same-as-admin-contact
billing-contact-handle:same-as-tech-contact

The @same-as makro always replaces the value for the specified contact handle with the email address of the makrotarget. If the referenced contact has to be created with this request, it takes the result handle.
Keep in mind that for .me-requests the contact handles for (.com/.net/.org/.info/.biz/.de)-contacts are not allowed. If you are referencing to a shortcut like hans@nose.net#1, you will get an error.

Last update: 2008-08-14 11:46